Download 2. Mark and remove hoses from air cleaner. Remove air cleaner. Disconnect vent hose from valve cover. Mark and remove vacuum hoses from throttle body, brake booster, A/C fast idle and pressure Vacuum Switching Valve (VSV). 3. Disconnect ground cable at transaxle, engine and alternator. Disconnect wire clamp at ignitor. Disconnect wiring connector at ignitor, engine fuse block and cowl connector. Disconnect wiring at alternator and A/C compressor. WARNING: Fuel lines are under pressure. Use caution during removal to prevent personal injury. 4. Cover fuel line at fuel filter with shop towel and carefully remove fuel line at fuel filter. Disconnect pressure sensor connector. Remove radiator and heater hoses. 5. Mark and remove vacuum hose between Bi-Metallic Vacuum Switching Valve (BVSV) and charcoal canister. Disconnect electrical connector at radiator fan motor. Remove radiator and A/C compressor drive belt.